Hardox 450 | Abrasion Wear Resistant Plate
Hardox 450 | Abrasion Wear Resistant Plate Hardox Plate Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD.
We are the Leading Supplier of Hardox 450.  
We supply and export to Singapore , Indonesia , Brunei , Labuan , Philippines and etc. 

E Steel supply Hardox 450 Plates.  

Hardox 450 Suppliers - Wear Resistant Plates , Origin Sweden 

HARDOX 450 is an abrasion resistant plate with a hardness of 450 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 450 offers very good weldability

Hardox 450 Plate has the Hardness of 425-475 HBW


Mechanical Properties of Hardox 450 

Yield strength : 175 KSI
Tensile strength : 205 KSI
Elongation : 14%

Impact Properties of Hardox 450 

Testing temperature :- 40 °C
Impact energy Charpy-V, longitudinal : Ft-lbs 30 , 40(J)

Heat Treatment and Fabrication of Hardox 450 Wear Resistant Plates 

HARDOX 450 has obtained its mechanical properties by quenching and when necessary by  means of subsequent tempering. The properties of the delivery conditon can not be retained after exposed to service or preheating temperatures above 480°F (250°C).HARDOX 450 is not intended for further heat treatment. For information concerning welding and fabrication, see our brochures on www.hardox.com
or consult our Technical Customer Service.
Appropriate health and saftey precautions must be taken when welding, cutting,grinding orotherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.

Mechanical Properties Typical values for 20 mm plate thickness
Yield Strength (Mpa) 1200
Tensile Strength (Mpa) 1400
Elongation (%) 10
Hardness Typical 425 – 475 HBW
Available Thickness 3.0mm – 120mm

* Values are to be used as a guide only. Actual values of specific plates can be obtained

Applications of Hardox 450 Plates 

Hardox 450 Wear Abrasion Plate can be used in the following ways : 
- Dumper bodies, containers, crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, etc.

Our Sales & Supplier Network

E Steel has a Wide Global Sourcing and Sales Networking including : 
Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version