Hardox 400 | Abrasion Wear Resistant Plate
Hardox 400 | Abrasion Wear Resistant Plate Structure Steel Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD.
Description

Hardox 400 Supplier (Origin Sweden) 


HARDOX 400 is an abrasion resistant plate with a hardness of 400 HBW, intended for applications where demands are imposed on abrasion resistance in combination with good cold bending properties. HARDOX 400 offers very good weldability.

Hardness : 370-430 HBW
 

 

Mechanical Properties of Hardox 400 

 
Yield strength : 1000MPa
 
Tensile strength : 1250MPa
 
Elongation : 10%
 
 

Impact Properties

 
Testing temperature :- 40 °C
 
Impact energy Charpy-V, longitudinal : 45(J)
 
 

Heat Treatment and Fabrication

 
HARDOX 400 has obtained its mechanical properties by quenching and when necessary by means of subsequent tempering. The properties of the delivery condition can not be retained after exposure to service or preheating temperatures in excess of 250oC (480o F).
 
HARDOX 400 is not intended for further heat treatment.For information concerning welding and fabrication, see our brochures on www.hardox.com or consult our Technical Customer Service.
 
Appropriate health and saftey precautions must be taken when welding, cutting, grinding or otherwise working on the product. Grinding, especially of primer coated plates, may produce dust with high particle concentration.


 

Chemical Properties


Grade C max Mn max P max S max SI max Cr max NI max Mo max B max V Other Element
                       
Hardox 400 0.20 1.60 0.025 0.70 0.80 1.00 0.80 0.005  
Sumihard k400 0.17 1.25 0.012 0.003 0.29 0.02 0.02 0.10 0.001  
Welhard 400 0.22 2.00 0.250 0.01 0.55 1.20 0.60 0.005 Nb-.05
Fora 400 0.20 1.60 0.020 0.003 0.01 1.00 0.50 0.20 0.003  
Raex 400 0.20 1.70 0.030 0.015 0.70 1.50 0.40 0.50 0.004 Ai=.060 max
Xar 400 0.28 1.50 0.025 0.01 0.80 1.00 0.50 0.50 0.005    
Brinar 400 0.18 1.50 0.015 0.005 0.30 1.55 1.20 0.60 0.005 Ai=.015 max
Dillidur 400 0.20 1.80 0.025 0.01 0.50 1.50 0.80 0.50 0.005 0.08 Nb=.05 max
JFE EH360LE 0.17 1.60 0.020 0.01 0.55 0.40 0.35 0.004 0.02  
Quard 400 0.16 1.60 0.025 0.01 0.70 0.50 0.25 0.25 0.005  


 

Applications 

Hardox 400 Wear and Abrasion Plate can be used in the following ways : 
-  Crushers, sieves, feeders, measuring pockets, skips, cutting edges, conveyors, buckets, knives, gears, sprockets, dumptrucks, loaders, industrial trucks, lorries, bulldozers, excavators, slurry pipe systems, screw conveyors, presses etc.




Our Sales & Supplier Network

E Steel has a Wide Global Sourcing and Sales Networking including : 
Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version