Monel K500 | Alloy K500 | UNS N05500
Monel K500 | Alloy K500 | UNS N05500 Nickel Alloy Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD.
We are the Leading Supplier of Monel K500 / Nickel Alloy K500. 
MONEL K500 is a age-hardenable Nickel-Copper Alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel
 with no minimum order (MOQ).

E Steel supply Monel K500 (Nickel Alloy K500) Round Bars / Rods / Shafts , Monel K500 (Nickel Alloy K500) Plates. 

E Steel supply Monel K500 to Petronas Projects , please refer : 
https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=96786



Monel K500 Suppliers - Nickel Alloy K500 , UNS N05500 , DIN 2.4375 

MONEL K500 is a age-hardenable Nickel-Copper Alloy which combines the corrosion resistance of Alloy 400 with high strength corrosion fatigue and erosion resistance.

It is said that Alloy K500 is an age-hardenable version of Alloy 400 (Monel 400).  

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium. MONEL K500 retains the excellent corrosion resistant characteristics of Monel 400 and has enhanced strength and hardness after precipitation hardening when compared with 400. Alloy K500 has approximately three (3) times the yield strength and double the tensile strength when compared with 400. MONEL K500 can be further strengthened by cold working before the precipitation hardening.

The increased properties are obtained by adding aluminum and titanimum to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated thoughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.


Chemical Composition of Nickel Alloy K500 

Element  Content (%) 
Nickel, Ni 66
Copper, Cu 29
Aluminum, Al 2.7
Iron, Fe 1
Manganese, Mn 0.7
Tungsten, W 0.6
Silicon, Si 0.25
Carbon, C 0.1
Sulfur, S 0.01


Physical Properties of Nickel Alloy K500

The physical properties of Monel K-500 are showed in the below table : 

Properties Metric Imperial
Density 8.45 g/cm³ 0.305 lb/in³
Melting point 1338°C 2440°F


Mechanical Properties of Monel K500 

The mechanical properties of Alloy Monel K500 are outlined in the below table : 

Properties Metric Imperial
Tensile strength 1000 MPa 145000 psi
Yield strength (at strain 0.200%) 655 MPa 95000 psi
Elongation at break 22% 22%
Reduction of area 40% 40%
Hardness, Rockwell C 27 27


Similar Specifications of Nickel Alloy N05500 

Other designations that are equivalent to N05500 Alloy K500 include:

  • Nickelvac K-500 
  • ASTM F467
  • ASTM F468
  • DIN 2.4375
  • MIL N-24549
  • QQ N286
     

Fabrication and Heat Treatment of Monel Alloy K500 

Machinability

Nickel Alloy K-500 is machined in the annealed condition.

Forming

Monel K500 can be formed using standard methods in the annealed condition.

Welding

DIN 2.4375 Alloy K500 is welded using all conventional methods in the annealed condition. After this process, stress-relief annealing is performed for the finished weldment.

Heat Treatment

Nickelvac K-500™ is heat treated by annealing. It can also be precipitation-hardened by performing aging heat treatment.

Forging

Monel K-500 is forged at 1038 to 1149°C (1900 to 2100°F) followed by quenching in water.

Hot Working

Monel K500 is hot worked at 872 to 1149°C (1600 to 2100°F) followed by quenching in water. It should not be cooled below 872°C (1600°F).

Cold Working

Monel K500 can be cold worked using standard methods

Annealing

Monel K500 is annealed at 1038°C (1900°F) followed by quenching in water.

Aging

Annealed or slightly cold-worked material is age-hardened at 608°C (1125°F ) for 16 h followed by cooling in a furnace. Severely cold-worked material is aged at 538°C (1000°F) for 6 h followed by cooling in a furnace.
 

Applications of Monel K500 

Typical applications for alloy K-500 are pump shafts and impellers; doctor blades and scrapers; oil-well drill collars and instruments; electronic components; springs; and valve trim.



Our Sales & Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors.  We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.  


 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version