Incoloy 825 | Nickel Alloy 825 | N08825
Incoloy 825 | Nickel Alloy 825 | N08825 Nickel Alloy Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD. Incoloy 825 | Alloy 825 Rods . Shafts . Round Bars Suppliers
We are the Leading Supplier of Incoloy 825 / Nickel Alloy 825. 
INCOLOY alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.

We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel
 with no minimum order (MOQ).

E Steel supply Incoloy 825 (Nickel Alloy 825) Round Bars / Rods / Shafts , Incoloy 825 (Nickel Alloy 825) Hexagon Bars , Incoloy 825 (Nickel Alloy 825) Plates.  
We are also the Incoloy Alloy 825 Suppliers Yalalevu (Fiji Island) , may refer : 
https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=97995



Incoloy 825 Suppliers - Nickel Alloy 825 , UNS N08825 , DIN 2.4858 


INCOLOY alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper, and titanium.

The nickel content is sufficient for resistance to chloride-ion stress-corrosion cracking. The nickel, in conjunction with the molybdenum and copper, also gives outstanding resistance to reducing environments such as those containing sulfuric and phosphoric acids.

The molybdenum also aids resistance to pitting and crevice corrosion.

The alloy’s chromium content confers resistance to a variety of oxidizing substances such as nitric acid, nitrates and oxidizing salt.

The titanium addition serves, with an appropriate heat treatment, to stabilize the alloy against sensitization to intergranular corrosion.

 

Chemical Composition of Nickel Alloy 625 

The following table shows the chemical composition for Incoloy 825 : 

Element

%

Element

%

Nickel

38.0 – 46.0

Carbon

0.05 max

Chromium

19.5 – 23.5

Manganese

1.0 max

Molybdenum

2.5 – 3.5

Sulfur

0.03 max

Copper

1.5 – 3.0

Silicon

0.5 max

Titanium

0.6 – 1.2

Aluminium

0.2 max

Iron

22.0 min (~33%)

 

 


Mechanical Properties of Incoloy Alloy 825 

General mechanical properties of Nickel Alloy 825 is shown as below : 

Tensile (ksi) .2% Yield (ksi)
85 30-35


Alloy 825 has good mechanical properties from cryogenic temperatures to moderately high temperatures.
However, exposure to temperatures above 1000° F can result in microstructural changes that significantly lower ductility and impact strength. Alloy UNS N08825 should not be used at temperatures where creep-rupture properties are design factors.



Specifications


INCOLOY Alloy 825 is designated as UNS N08825 and Werkstoff Number 2.4858. It is listed in NACE MR0175 for oil and gas service.

Trademark Notice: Some names are trade names and/or trademarks of specific manufacturers. Incoloy Alloy 825  is a Registered Trademarks of Special Metals Corporation and Its subsidiaries.




Our Sales & Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

E Steel is a Global Metal Procurement Company in providing and sourcing raw materials to the wide range of engineering industries / sectors.  We works as the the Online B2B Metal Marketplace to help our customers in finding the special steels that might feel hard to source locally.  


 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version