S45C Cold Drawn Bar | 760 Polished | EN9 Carbon Steel
S45C Cold Drawn Bar | 760 Polished | EN9 Carbon Steel  Carbon Steel Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD.
E Steel SDN BHD supply a wide range of Carbon Steel Sheets , Carbon Steel Round Bar and Rod, Carbon Steel Plate from ASTM A36 , 760 Steel Plate and rod , A105 Carbon Steel , etc.  
Our spirit is to help the local SMEs on the sourcing of different steels and metal with no minimum order (NO MOQ).  

Grades : ASTM A105 , S45C , S50C , AISI 4140 (ASSAB 709), AISI 4340 (ASSAB 705), AISI 4130, 5919, 6587

E steel sdn Bhd supply S45C Cold Drawn Bar | Polish Bar with h9 tolerance to fullfill market demand.
Size Range from Diameter 10mm to 100mm. Besides of 1045 (S45C) Carbon steel, we do have Oil Hardening Steel 1.2510 / O1 steel with polish condition with tolerance h8.



AISI 1045 Polished Suppliers - S45C , ASSAB 760 , EN9 Cold Drawn Polished Bars 

Material 1045 Steel is a medium tensile low hardenability carbon steel generally supplied in the cold drawn or turned and polished condition, with a typical tensile strength range 600 – 950 Mpa and Brinell hardness range 179 – 280. in either condition.

Characterised by good strength and impact properties, with good machinability and reasonable weldability in the as supplied condition. S45C Medium Carbon Steel has a low through hardening capability with sections up to around 60mm only generally recommended as suitable for through hardening and tempering.

It can however be successfully flame or induction hardened in the as supplied condition resulting in surface hardnesses of up to Rc 54 – Rc 60 depending upon quenching medium employed, type of set up, section size etc. Core strengths will remain as supplied. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements.

1045 Steel (CK45 / EN8 Carbon Steel) is used extensively by all industry sectors for applications requiring more strength and wear resistance than the low carbon / mild steels can provide and the higher strength of the low alloy high tensile steels is not necessary, plus those applications requiring flame or induction hardening.


Applications of ASSAB 760 Medium Carbon Steel : 

Typical applications are: Axles Various, Bolts, Connecting Rods, Hydraulic Clamps and Rams, Pins Various, Rolls Various, Studs, Shafts, Spindles etc.


E Steel Sdn Bhd are Malaysia steel supplier/stockist providing raw materials to the wide arrays of engineering industries/sectors.



Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version