Alloy 800 Seamless Pipe Supplier

Incoloy 800 / Alloy 800HT (32 Ni/21 Cr) Seamless Pipe & Tube Supplier Malaysia, Singapore and Indonesia

Above Material is Incoloy 800h/HT , Alloy 800H/HT Seamless Pipe with OD60.3mm x T3.91mm (Origin : Italy)

Mechanical Properties for Nickel Alloy 800

Properties	Metric	Imperial
Tensile strength(annealed)	600 MPa	87 ksi
Yield strength(annealed)	275 MPa	39.9 ksi
Elongation at Break	45%	45%

Heat Treatment & Fabrication for Incoloy 800H/HT

Machinability - Machining characteristics of this INCOLOY alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.

Welding - INCOLOY alloy 800 can be welded by common welding techniques, using a matching filler metal.

Forming - This alloy exhibits good ductility and hence can be formed using conventional methods

Hot Working - INCOLOY alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).

Cold Working - Cold working may be done on the alloy using standard tooling.

Annealing - INCOLOY alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.

* You may contact us through ; https://www.ecarbonsteel.com/index.php?ws=showproducts&products_id=3286305

Published : 23-Dec-2020