Nitronic 60 | S21800 Stainless Steel
Nitronic 60 | S21800 Stainless Steel  Stainless Steel Malaysia, Selangor, Kuala Lumpur (KL), Klang Supplier, Suppliers, Supply, Supplies | E STEEL SDN. BHD. Nitronic 60 Supplier Nitronic 60 Plates
We are the Leading Supplier of Stainless Steel Nitronic 60.   
Nitronic 60 Stainless Steel was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF.   


We supply and export to Singapore , Indonesia , Brunei and other ASEAN Countries.  
Our specialty is to provide wide range of stainless steel with no minimum order (MOQ).

E Steel supply Stainless Steel Nitronic 60 Round Bars / Rods / Shafts , Nitronic 60 Plates with cut to size service.  


E Steel is the Nitronic 60 Suppliers Singapore , export and supply to Singapore @ 
https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=102989
E Steel supply 1.2tons of Nitronic 60 Plates to the MNC Malaysia in semiconductor Industry  @ https://www.ecarbonsteel.com/index.php?ws=latestnews&nid=108343

NITRONIC 60 Suppliers - ALLOY 218 , UNS S21800 , Nitronic 60 AMS 5848D Stainless Steel 

Nitronic 60 is truly an all purpose metal.  This fully austenitic alloy was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF.   
 
The oxidation resistance of Nitronic 60 is similar to stainless steel 309SS., and far superior to stainless steel 304SS.
This grade is best known for its wear and galling resistance.



The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably.

Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock.



Nitronic 60 is a high Silicon, high Manganese, Nitrogen strengthened austenitic stainless alloy. Nitronic 60 is an all purpose metal that was originally designed as a temperature alloy and therefore has good high temperature properties for temperatures around 1800ºF.  Nitronic 60 is used in the Aerospace , Food and Drug, Oil Field, Petrochemical, Surgical and Chemical Processing Industries.


 

Chemical Compositions of Nitronic 60 
 

Chemical Composition Limits 
Weight %  Ni Cr Mn Si N Mo C
Nitronic 60  8 - 9 16 - 18  7 - 9 3.5 - 4.5 0.08 - 0.018 0.75 max  0.10 max



Mechanical Properties of S21800 Stainless Steel 

Mechanical Property Requirements under 0.5'' ; 

Mechanical Property Requirements under 0.5'' 
  Ultimate Tensile  Yield Strenght (0.2% OS)  Elong.  R/A  Hardness
Min 105 KSI 55 KSI 35% 55%   
Max           
Min 724 MPA 379 MPA       
Max           

 

Mechanical Property Requirements over 0.5'' ; 
 
Mechanical Property Requirements over 0.5'' 
  Ultimate Tensile  Yield Strenght (0.2% OS)  Elong.  R/A Hardness
Min 95 KSI  50 KSI 35%  55%  
Max           
Min  655 MPA 345 MPA      
Max           

 

Applications of Nitronic 60 Stainless Steel - 

  • Automotive valves – can withstand gas temperatures of upto 1500°F for a minimum of 50,000 miles.
     
  • Fastener galling – capable of frequent assembly and disassembly, allowing more use of the fastener before the threads are torn up, also helps to eliminate corroded or frozen fasteners.
     
  • Pins – Used in roller prosthetics & chains to ensure a better fit of parts (closer tolerance, non-lubricated) and longer lasting.
     
  • Marine shafts – better corrosion than types 304 and 316, with double the yield strength.
     
  • Pin and hanger expansion joints for bridges – better corrosion, galling-resistance, low temperature toughness, & high charpy values at sub-zero temps compared to the A36 and A588 carbon steels commonly used.

Our Sales & Supplier Network

Australia, Pakistan,  Malaysia, Singapore, Taiwan, China,Vietnam, Belgium, Japan, South Korea, Philippines, France, United Kingdom, Indonesia, Thailand, Hong Kong, China, Sweden, United States, Dubai, Finland, Brunei,Germany.

 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version